Announcement

Collapse
No announcement yet.

Extractor flew away.

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Extractor flew away.

    Managed to lose the extractor, spring, and pin. Happened when shooting in the woods so parts are long gone. Eagle imports has the extractor and spring but not the pin. Anybody have an extra one or know where else to get one?

    #2
    Hey RhinoDave,

    I often use the shank from a broken drill bit to make a new pin. (Hint: cut to length carefully with a Dremel tool)

    regards jab

    Long story short, jab is a male.
    Active member in Bersa Forums since 03-13-2005.

    Certified Armed Infidel

    Comment


      #3
      Thanks for the tip. I may have to do this. Does it need to be a press fit?

      Comment


        #4
        Originally posted by RhinoDave View Post
        Thanks for the tip. I may have to do this. Does it need to be a press fit?
        Method 1: Yes, I generally find one that slides in then use the next larger size.
        (Use a Dremel tool to put a slight chamfer edge on each end.)

        Method 2: If it is a snug fit put a slight bend near the top edge of the pin so it locks itself in.

        Good Luck jab
        Long story short, jab is a male.
        Active member in Bersa Forums since 03-13-2005.

        Certified Armed Infidel

        Comment


          #5
          Thanks again for the information.

          Comment


            #6
            If you want a factory part you might check the following: https://bersa.eagleimportsinc.com/bersa/warranty/ I am not sure they sell your part, but it us wearth a try. Also, is there a chance this might be covered under warranty?
            Good luck,
            Gary

            Comment


              #7
              Do what Pollyb said and make your own pin. Drill bit and reamer shanks have saved my butt more than a few times.

              In memory of our Founder, Michael T. June 15, 1946 - February 26, 2017.

              Comment


                #8
                Never throw away a broken drill bit, lol.
                "The kindest, most sensitive guy on the entire internet."

                Comment


                  #9
                  Originally posted by PHMadness View Post
                  Never throw away a broken drill bit, lol.
                  True.....I keep a medium size medicine bottle at my work area to keep small ones in.
                  Long story short, jab is a male.
                  Active member in Bersa Forums since 03-13-2005.

                  Certified Armed Infidel

                  Comment

                  Working...
                  X