Announcement

Collapse
No announcement yet.

Bersa 383da MAG Modification?

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

    Bersa 383da MAG Modification?

    So has anyone looked into getting their 383DA modified so that the newer thunder mags would fit?

    After looking at both for a long time it looks like it can be done just may need a good vice grip and a dermal.
    Make the mag cavity a hair slightly larger. there seems to be enough room to do it.


    Thoughts?

    #2
    Re: Bersa 383da MAG Modification?

    Originally posted by 57offsuit View Post
    So has anyone looked into getting their 383DA modified so that the newer thunder mags would fit?
    Such a modification would be labor intensive and impractical.....the mag well would have to be machined in it's full lenght up the front to square(rounded corners) the front. I don't think such a proceedure could be done with a Dremel tool and would be difficult for a machinist.

    Note: You could modify your model 97 mag with a new mag slot and remove the mag safety on your 383DA.

    JM2 pennies

    regards jab
    Long story short, jab is a male.
    Active member in Bersa Forums since 03-13-2005.

    Certified Armed Infidel

    Comment

    Working...
    X