Announcement

Collapse
No announcement yet.

Help to reassemble a Bersa 383 DA

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

    Help to reassemble a Bersa 383 DA

    All - New here, but have owned a Bersa 383 DA since '92 when I bought it from a buddy for $45 with one magazine. Well, I haven't shot it recently and when I went to shoot it, it began to not fire properly, though I could manually cock the hammer, but the trigger would not trip it. Anyway, probably should of oiled it first, so I disassembled it and thought maybe it was the trigger spring, and yes the trigger is also disassembled but the trigger spring does not seem to be broken. Now here is where I admit I am a moron, because I failed to note how the trigger spring/slide stop went back into place. Can anyone offer any help on how to reassemble? Or is there anyone in MN that knows more than me about the reassembly process? I really want to get it back together as I bought two more magazines that cost me more than I originally paid for the pistol. Any help is appreciated. Thanks, David H

    #2
    Re: Help to reassemble a Bersa 383 DA

    Welcome to Bersa Chat David H. Sorry to hear of your trouble & I know the feeling. Pollyb is our resident expert on Bersa .380s & he should be along to help, or you might send him a PM.

    As for lubrication, generally it only requires a standard field strip & that's much easier to do.
    Think Green.......Recycle Congress

    Certified Armed Infidel

    Right Wing Extremist

    Comment


      #3
      Re: Help to reassemble a Bersa 383 DA

      Welcome to BERSA CHAT David.. See if this might help you any... http://www.bersachat.com/forums/show...83DA-383A-Info
      A well regulated Militia, being necessary to the security of a free State, the right of the people to keep and bear Arms, shall not be infringed.

      Comment


        #4
        Re: Help to reassemble a Bersa 383 DA

        In the meantime, here's a link to a thread Pollyb provided which may or may not help you. Check it out.

        http://stevespages.com/pdf/bersa_383.pdf
        Think Green.......Recycle Congress

        Certified Armed Infidel

        Right Wing Extremist

        Comment


          #5
          Re: Help to reassemble a Bersa 383 DA

          I see Clag beat me by a couple minutes!!
          Think Green.......Recycle Congress

          Certified Armed Infidel

          Right Wing Extremist

          Comment


            #6
            Re: Help to reassemble a Bersa 383 DA

            Welcome David H,

            clag39 & mitchr sent you in the right direction....let us hear of your success upon reassembly.
            Long story short, jab is a male.
            Active member in Bersa Forums since 03-13-2005.

            Certified Armed Infidel

            Comment


              #7
              Re: Help to reassemble a Bersa 383 DA

              I cam across this while looking for help on mine
              https://www.youtube.com/watch?v=S-UXA-mfnws

              Comment

              Working...
              X